|
 |
|
|
|
|
PCV Reroute Kit for LLY, LBZ, LMM. Kit contents: 12.5 ft of black low pressure hydraulic hose, 2 fittings with o-rings, 2 hose clamps, 8 zip ties, our Billet Aluminum Resonator All Season Diesel Perormance Mouth Plug Plug, and a PCV Port Plug. |
|
|
|
|
|
|
|
|
|
EGR Delete Kit with grid heater. Note: Add a DHD 500-106 Adaptor Plate in order to remove the grid heater during summer months. This delete kit does not require the removal of the EGR Cooler. If the EGR Cooler is not removed, you will need a blocker plate. If you want to remove the EGR Cooler a modified up pipe is required. See additional listings in this
|
|
|
|
|
|
|
|
|
|
The perfect upgrade kit for your 2006-2010 LBZ-LMM intake system! This kit includes our 3” bridge, delete kit tube and all the attachment hardware. The smooth bore bent tubing replaces your stock castings and provides a full 3” diameter cross section. This results in a whopping 152% increase in airflow over the stock set up. (see chart below) You’ll notice a pronounced
|
|
|
|
|
|
|
|
|
|
This intercooler tube is constructed of 3" mandrel bent, aluminum pipe for smooth air flow transition and increased power. For a tight and secure installation, this kit comes with a heavy duty silicone coupling, an all stainless steel T-bolt clamp. Works with both stock and aftermarket intercooler systems with factory-style inlets. This kit offers these benefits: Increased MPG Lower EGTs
|
|
|
|
|
|
|
|
|
|
This intercooler tube is constructed of 3" mandrel bent, aluminum pipe for smooth air flow transition and increased power. For a tight and secure installation, this kit comes with a heavy duty silicone coupling, an all stainless steel T-bolt clamp. Works with both stock and aftermarket intercooler systems with factory-style inlets. This kit offers these benefits: Increased MPG Lower EGTs
|
|
|
|
|
|
|
|
|
|
The stock high pressure power steering lines are prone to leakage. If you replace them with OEM or generic replacement parts you’ll get the same leakage soon after installation. Fix this problem once and for all with our upgrade kit. We replace the OEM crimp style fittings with high quality reusable stainless steel fittings welded to the rigid tube. The hose is replaced with 3000 psi
|
|
|
|
